Buyers often assume a recent build has already been checked. Municipal inspections confirm code compliance at specific stages — they are not a condition report on the finished house.
What turns up on new homes
Deficiencies on newer construction are usually small individually and meaningful in aggregate, and most are far cheaper to address while a warranty is live.
- Missing or incorrectly installed flashing at penetrations
- Grading left short of finished, sloping toward the building
- Attic ventilation paths blocked at the eaves
- Exhaust fans not ducted to the exterior
- Incomplete insulation coverage and air sealing
- Plumbing fixture installation and drainage issues
- Electrical devices, bonding and panel labelling
Warranty timing
BC new-home warranty coverage runs on a schedule, with the earliest and broadest periods expiring first. An inspection before a coverage milestone gives you a documented list to submit while the claim is still available.
Worth the cost
A warranty inspection is typically the cheapest inspection you will ever buy relative to what it recovers. Call and we will talk through where the home sits in its warranty period.
Municipal inspections are not a condition report
This is the misunderstanding at the heart of the question. Municipal inspections confirm code compliance at defined stages during construction. They are not a comprehensive review of the finished house, they do not revisit work after sign-off, and they are not carried out on your behalf as the buyer.
A home inspection on a newer house asks a different question: what is the condition of this building now, as completed and as it has performed since.
What actually turns up on new construction
Deficiencies on newer homes tend to be small individually and meaningful in aggregate. They are also disproportionately items that are cheap to correct early and expensive to correct later, which is precisely why the timing matters.
The pattern is consistent: the failures cluster in the details finished last, or finished by whoever was available at the end of the project.
- Flashing missing or incorrectly lapped at penetrations and transitions
- Grading left short of finished, or sloping back toward the building
- Attic ventilation paths blocked where insulation meets the eaves
- Exhaust fans not fully ducted to the exterior
- Incomplete insulation coverage and air sealing
- Plumbing fixture installation and drainage details
- Electrical devices, bonding and panel labelling
- Deck and stair construction, particularly ledger attachment
Warranty timing is the real argument
New-home warranty coverage in BC runs on a schedule, and the earliest and broadest periods expire first. That creates specific windows where an inspection has unusual leverage: a documented list submitted while coverage is live is a claim, and the same list a year later is a repair bill.
If you are approaching a coverage milestone, an inspection ahead of it is one of the highest-value things you can do. Check where your home sits in its warranty period and work backwards from there.
Buying new from the developer
A pre-possession or walkthrough inspection on a newly completed home gives you an independent list before you take ownership, which is a materially different negotiating position than raising items afterwards.
It is worth doing even where the builder has a good reputation. A thorough builder will generally welcome a clear, specific list; it is easier to act on than a vague complaint months later.
So is it worth it?
In my experience a warranty inspection is typically the cheapest inspection anyone buys relative to what it recovers, because the findings are still someone else’s responsibility to fix.
Call and tell me the age of the home and where it sits in its warranty period. If the timing means an inspection would not be useful to you, I will say so — but on a home still inside coverage, it usually is.
The first winter tells you a lot
Many of the items that matter on a new build only declare themselves once the house has been through a full wet season. Grading that looked fine in summer shows where water actually pools; envelope details that were never tested get their first real load.
If you are buying a home that is a year or two old, that is useful to you — the building has already been tested and the evidence is there to read. If you are taking possession of something brand new, it is an argument for an inspection now and attention again after the first winter, while warranty coverage is still live.
- Pooling or settlement around the foundation after wet weather
- Staining or efflorescence appearing on new concrete
- Condensation patterns on windows during cold snaps
- Attic moisture showing on the underside of new sheathing
Thinking about a property?
Call Craig and talk it through before you book — Vancouver Island, residential and commercial. 778-681-2874 or book an inspection.
